Canadian Solar 450W HiKU Panel, mono Perc, EVO2
High Power Mono PERC Module
Canadian Solar's Mono PERC Modules takes the best of 2 technologies and combines them into one. Mono-crystalline cells are manufactured from high quality silicon crystals which have better performance in lower light, longer lifespan and higher efficiency rates.
Traditional solar cell technology incorporates an emitter layer in the front surface and a black coating at the rear side of the panel. The latest method, known as Passivated Emitter and Rear Cell (PERC) uses dielectric passivation film on the rear surface of the solar cells. The newer method, Mono PERC, can therefore absorb the sunlight on the front surface. As well as reflected light on the surface. This increased absorption allows for more of the suns energy to be harnessed.
More power
- 26 % more power than conventional modules
- Up to 4.5 % lower LCOE Up to 2.7 % lower system cost
- Low NMOT: 42 ± 3 °C
- Low temperature coefficient (Pmax): -0.35 % / °C
- Better shading tolerance
- Lower internal current, lower hot spot temperature
- Minimizes micro-crack impacts
- Heavy snow load up to 5400 Pa, wind load up to 3600 Pa*
 |
Product in compliance with the Extended Producer Responsibility Scheme. Read more... |
|
 |
Canadian Solar 450W panels are utilized in the following areas:
|
 |
Canadian Solar used for Algoa FM green building Rubicon’s energy and storage products are used in various applications including residential and commercial buildings, as well |
Parameters
Nominal max. power: 450 W
Opt. Operating Voltage: 41.1 V
Opt. operating current: 10.96 A
Open circuit voltage: 49.1 V
Short circuit current: 11.60 A
Module efficiency: 20.4%
Operating temperature: -40°C ~ +85°C
Max. system voltage: 1500V (IEC/UL) or 1000V (IEC/UL)
Module fire performance: TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730 1000V) or CLASS C (IEC 61730)
Max. Series fuse rating: 20 A
Application classification: Class A
Power tolerance: 0 ~ + 10 W