GoodWe Battery enclosure for GW5048-ESA

2 sold in last 8 hours
Goodwe
BCL9600
ENERGY : Solar PV Balance Of System
This is only the battery enclosure. You will also require the following: GW5048-ESA inverter SECU-A5.4L (1 for max 2.3kw output or 2 for full power)

This is only the battery enclosure. You will also require the following:

  • GW5048-ESA inverter
  • SECU-A5.4L (1 for max 2.3kw output or 2 for full power)

Parameter

Number of battery units: Up to 4 x 19" Rack Mountable Battery Packs

Storage capacity: Up to 9.6kWh (4 x 2.4kWh Pylon Tech Batteries)

Battery voltage: 48V DC Nominal / 60V DC Maximum

Battery chemistry: Lithium-ion with BMS

Access type: Removable front Panels

 

Cable specification

Battery cable rating: 4 x 65A

Battery cable type: 8 AWG (8.36mm2)

Battery cable termination (battery enclosure): Surlok Amphenol Connector

Battery cable termination (inverter): Amphenol H4 (65A)

BMS cable type: Depends on Battery Type

BMS cable termination: Refer to Battery Enclosure Installation Manual

 

Ventilation specification

Ventilation type: Passive and Active Cooling

Ventilation control: Smart Temperature Control

Number of fans: 2

Fan power: 48V DC / 0.13A Per Fan

Fan activation temperature: Variable Depending on Charge/Discharge

Incoming ventilation aperture: 288cm2 with Washable Filter

Outgoing ventilation aperture: 288cm2 with Washable Filter

Passive airflow rate:  30cm3/min

Active airflow rate:  320cm3/min

 

General data

External dimension (W x H x D): 516mm x 205mm x 280mm (with Feet)

Mounting and weight – empty: 32kg Rear Fixing

Mounting and weight - with batteries: 130kg Typical

Ambient temperature range: Based on Battery Specification

Environmental protection rating:  IP54 - Protected From Rain, Splashing and Spraying

Noise emissions: Less than 25dB

Warranty: 5 Years

Construction:  Powder Coated Steel Chassis

Finish:  Sealed, Powder Coated front Covers and Chassis

Supply:  Ships Pre-assembled

Maintenance: Externally Serviceable Dust Filters

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
GoodWe Battery enclosure for GW5048-ESA
You have successfully subscribed!
This email has been registered